Home > Campus Infrastructure and Services > HWIC-4ESW and 3750 vlan configuration

HWIC-4ESW and 3750 vlan configuration

HWIC-4ESW:

http://www.cisco.com/en/US/docs/ios/lanswitch/configuration/guide/lsw_hwic_ethsw_ic_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1046684

I don’t have this at my home setup and haven’t had to config it in the field. From the docs, the configuration here is similar to the old 2900s/3500s via the vlan-database command in enable mode.

enable
vlan database
vlan vlan-id
vtp server|client|transparent|domain|password
show vlan-switch

Also of note is that the ports on this module must be set to trunk mode for the ip phones.

interface FastEthernet1/0
 switchport trunk native vlan 10
 switchport mode trunk
 switchport voice vlan 110

3750:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_44_se/comman/reference/cli2.html#wp7730585

“?” will be enough to get by on these switches. Pretty much similar to the other switches(3550s,3560s) as far as this section is concerned.

Advertisement
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.